KEIRBY PRODUCT DATA SHEET
Ceramic Fibre Filled Rope Lagging
With Glass Braid
- Standard
With Glass / Inconel Braid - High Temperature
Standard
(Glass Braid)
Supplied in 50m & 30m Coils - 10mm Dia to 30mm Dia, and in 25m Coils 35mm
Dia to 70mm Dia. Non standard lengths to order.
Light weight, resilient, high temperature material, with low thermal conductivity; resistant to thermal shock; excellent thermal stability; low heat storage; excellent corrosion resistance.
Resists attack from most corrosive agents with the exception of hydrofluoric acid, phosphoric acid & concentrated alkali's.
The rope will continue to function after the braiding yarn has melted (at approx 550°C) as long as it is contained.
Suitable for expansion joint packing in boilers, furnaces, kilns, etc., and as a door joint seal in coke ovens.
Density approx 128/160kg per cu.metre
Composition : 100% alumina
silica (Max Temp 1260°C).
Braid: Glass yarn
High Temperature
(Glass / Inconel Braid)
Supplied in 50m coils 10mm Dia. to 30mm Dia., and in 25m Coils 35mm Dia. to
70mm Dia. Non standard lengths to order.
Details of material as for standard ceramic fibre rope lagging, but the glass / inconel braid will continue to function at temperatures up to approx 1100°C continuous 1400°C max.
Composition: 100% alumina
silica
Braid: Glass / Inconel Yarn
Cotton Braid
Details of material as for standard ceramic fibre rope lagging, but the cotton
braid will burn off at approximately 150°C. The rope will continue to
function as long as it is contained.
Typical Application: Kiln car seals, high temperature lagging for pipes,
dummy bar seals, flue seals etc.